Mekar Srl
Home
Contact Us
Enquiry
Get Adobe Flash Player

Water Cooling Tower

Home » Water Cooling Tower


Water Cooling Tower

Three versions of Water Cooling Tower can be purchased from us. Each suits a set of applications. The cooling tower series 05MK is developed in 26 sizes, which cover a capacity range from 22 to 1,750 kW. The high resistance to the atmospheric agents constitutes a further strength point of the water cooling towers of Mekar. The efficiency of thermal exchange of all the range, contributes to sensitively decrease the consumptions of energy and water of the plant. We offer this Water Cooling Tower at competitive rates to the clients.

Types of Water Cooling Tower
05MKTE series
  • The units cover the lower capacity range of 22 to 65Kw
  • These Water Cooling Tower are produced in four sizes
  • They are used for packaged air conditioners and small chillers
  • Equipped with axial fans, have a simple and sturdy construction, are very reliable and have an attractive cost/quality ratio.
  • The low noise level and reduced water consumption make these units ideal for installation in densely populated urban areas

05MKTC series
  • The 05MKTC series towers are equipped with centrifugal fans mounted on one side only of the unit in a semi-recessed position protected from rain, snow, and hail
  • They cover the medium capacity range of 87 to 436Kw and are used in civil and industrial applications such as supermarkets and commercial refrigeration plants
  • These units are produced in twelve different sizes in capacity steps of approximately 10% for each size of unit thus allowing for an accurate, cost effective selection
  • These units can be installed with ducted air inlet and outlets to permit internal installation
  • They can also be fitted with attenuators to reduce the noise levels where necessary
  • Since the unit fans are installed along one side only of the unit it is possible to position the opposite side up against a wall
  • The units, thanks to their robust design, can be installed directly on anti-vibration mounts without the need of a metallic base frame which is often required with other brands of towers, thus considerably reducing installation costs

05MKDTC series
  • This series of towers is the continuation of the preceding series
  • The units are equipped with two rows of centrifugal fans, one on each side of the unit and always in a semi-recessed position
  • The capacity range is from 520 to 1750Kw covered by 10 different tower sizes
  • Their principal use is in high capacity refrigeration plants and in process cooling
  • The units can be installed with ducted air inlet and outlets to permit internal installation. They can also be fitted with attenuators to reduce the noise levels where necessary
  • Also these towers, thanks to their robust design, can be installed directly on anti-vibration mounts without the need of a metallic base frame

Download



Select Language:

English French Hindi Korean